Caliber – 184mm 44* Satin Coral

$33.00

*sold per individual truck*

  • 44 degree baseplate
  • Updated bushing seat providing a perfect no-slip-fit
  • Pivot re-designed for tighter tolerances with an updated chamfer
  • Circular kingpin hole with updated diameter
  • Truck strength increased by 40%
  • Pressed-in Grade 8 hex head kingpin
  • Beefed up and reinforced baseplate
  • Thinner paints used for tighter tolerances
Category: Tag:

CALIBER II Trucks
A precision feel now available in cast

UPDATED INNER / OUTER STEPS ON BUSHING SEAT
– The new Inner-Step provides an increased contact area with the bushing, resulting in dramatically higher rebound and overall responsiveness. The Inner-Step diameter has been adjusted to 25.4mm to eliminate all slop.
– The new Outer-Step is now a perfect circle with a 31.5mm diameter, creating a perfect no-slop-fit with oversized aftermarket bushing combinations.

PIVOT WITH TIGHTER AND UPDATED CHAMFER
– By decreasing our pivot cup seat chamfer, we have increased pivot cup surface area contact with the baseplate. This creates a snugger fit for the pivot pin and prevents side-to-side play as the pivot cup breaks in.

CIRCULAR KINGPIN HOLE WITH UPDATED DIAMETER
– With a diameter of 17.4mm, our kingpin hole has been updated to match the specs of out precision trucks. A circular hole provides a consistent and uniform lean, while also allowing proper clearance to avoid kingpin bit on the hanger.

INCREASED TRUCK STRENGTH
– With a new in-house heat treatment process at our manufacturing facility, we were able to strengthen our trucks by as much as 40%.

PRESSED-IN GRADE 8 HEX HEAD KINGPIN
-We have removed all slop and play by switching to a pressed-in kingpin. This provides maximum control and responsiveness through corners, but can still be hammered out and replaced with different length removable kingpins for extra levels of customization.

REINFORCED BASEPLATE
– We have reinforced our baseplate by thickening the metal towards the kingpin. This provides increased strength and resistance against high speed impact.

THINNER PAINTS FOR TIGHTENED TOLERANCES
– Powder coats are very thick and can throw off tolerances and effect overall truck performance. We have switched over to a thinner paint system that has virtually no impact on performance.

Scroll to Top